Guide: How To Fix Fox Transfer Dropper Sticking

The Fox Transfer Dropper Post is a fan-favorite for mountain bikers, thanks to its ability to swiftly adjust saddle height mid-ride.

But, like all dropper posts, it can encounter some sticking problems.

In this post, we’ll explore the reasons why your dropper post may be sticking, as well as some potential solutions to get you back to smooth riding.

Fox Transfer Dropper Sticking

A sticking MTB dropper post can be frustrating, and can even be dangerous in certain situations. If your Fox Transfer is stuck, it’s likely that there’s an issue with the post’s internal components. 

Reasons Why Your Fox Transfer Dropper Is Sticking

There are plenty of reasons for a 2021 Fox Transfer Dropper Post sticking, including:

• Lack Of Lubrication: Over time, the internal components of your dropper post can become dry and cause the post to stick. Proper lubrication is crucial to keep your dropper post operating smoothly.
• Air Pressure Issues: The Dropper Post operates using air pressure, and if there’s a problem with the pressure, it can cause the post to stick. This could be due to a leak or an issue with the air valve.
• Damaged Or Worn Components: If your dropper post has been in use for a while, it’s possible that some of the internal components have become damaged or worn, which can cause the post to stick.
• Cable Tension Issues: If the cable tension on your dropper post is too tight or too loose, it can cause the post to stick.

Step-by-Step Solution To Fix Fox Transfer Dropper Post

There are a few fox transfer dropper troubleshooting solutions you can try. Here’s a step-by-step guide to fixing your dropper post:

Step 1

Check the air pressure. Make sure the air pressure in your dropper post is at the recommended level. If it’s too low, add air using a shock pump. If it’s too high, release air until you reach the correct pressure.

Step 2

Lubricate the dropper post. Apply a dropper post-specific lubricant to the stanchion and wipe away any excess with a clean cloth. This can help to prevent sticking caused by lack of lubrication.

Step 3

Check the cable tension. Ensure that the cable tension is correct by loosening or tightening the cable using the barrel adjuster. This can be found where the cable enters the dropper post.

Step 4

Inspect the internal components. If the above steps don’t resolve the issue, it may be necessary to inspect the internal components of the dropper post. This should only be done by a qualified technician or bike shop, as disassembling the post can be tricky and requires specific tools.

How Do You Fix A Sticky Dropper Post Lever?

If you’ve followed the instructions but still find that your dropper post lever is sticky, there are a few things you can do to resolve the issue::

• Wipe the lever and cable with a clean cloth or soft-bristled brush to remove dirt and debris.
• Lubricate the cable and lever pivot points using a lubricant designed for bicycle components. Work the lever back and forth to distribute the lubricant.
• Check the cable tension and adjust it if necessary. Too loose tension can cause the lever to stick, while too tight tension can prevent the dropper post from fully extending.

Tips To Make Your Dropper Post Smoother

Here are some things you can do to help keep your Fox Transfer Dropper Post operating smoothly:

1. Keep It Clean: Regularly clean your dropper post using a damp cloth. This will help prevent dirt and debris from getting inside the post and causing sticking.
2. Lubricate Regularly: Put a dropper post-specific lubricant on the stanchion regularly to keep the post operating smoothly.
3. Store It Properly: Make sure your dropper post is in the extended position when not in use. This can help prevent the post from getting stuck in the compressed position.

Can Fox Transfer Be Serviced?

Yes, the Fox Transfer Dropper Post can be serviced. 

However, it’s recommended that servicing is done by a qualified technician or bike shop, as disassembling the post can be tricky and requires specific tools. 

Fox also offers a factory service program for their dropper posts, which involves sending your post to their service center for maintenance.

How Often Do You Need To Service A Fox Transfer Dropper Post

The recommended service interval for the dropper post is every 125 hours of riding time or every 12 months, whichever comes first. 

However, if you notice any issues with your dropper post, such as sticking or reduced performance, it’s a good idea to have the fox transfer serviced sooner. Regular maintenance and lubrication can also help prevent the need for major repairs.

FAQs

Final Thoughts: Fox Transfer Dropper Sticking

So there you have it! If you’re experiencing sticking issues with your Fox Transfer Dropper Post, don’t let it get you down.

By following some of the tips and tricks we’ve outlined in this post, you’ll be back to smooth riding in no time. 

Remember, proper maintenance and care are crucial to keeping your dropper post working smoothly, so make sure to give it the attention it deserves. Keep on shredding those trails!